- Product Review
Genuine Subaru part. Comes with everything needed to install expect for installation instruction. Just message japan parts and they will send you a copy. Pretty straight forward installation, just follow the instructions step by step and your good to go.
- Photo
- Installation tips
Installed on 2016 Wrx sti, requires swapping 2 plugs and tapping into 1.
Swap black plug 16pin from the car harness and replace with black wire from new harness. Swap middle plug 3pin from car harness and replace with red plug from new harness. The black plug and plug from 3pin goes back into the new plug include in kit. Plug and play and your good to go.
Written by Murat (AUSTRALIA)
2018-04-09
- Product Review
The product it self is actually a quality item as you would expect for OEM - however there is really no instructions but Japan Parts a kind enough to provide an English translated version which helps a little. I installed this for my Levorg STI Sportswagon. Biggest challenge is removing the existing wires from the plugs.
Once installed, the mirrors will FOLD when you lock the car and will ONLY unfold when you turn the ignition on.
- Photo
- Installation tips
For the door trim removal, there is a video on youtube that is the same as Levorg: https://www.youtube.com/watch?v=H7KcfxlNmsA
You need to connect a wire to the door trigger wire. On the Levorg, this is any of the RED / green stripe - please see photo.
NOTE: each plug has a clip that needs to be pushed back in order for you to be able to remove the wires. Please take care and have patience.
You need to remove the BLACK wire from the big plug and also remove the white/green white from plug with 3 wires from the door and connect them to the NEW PLUG that is supplied with the kit. Please see photo 2.
You need to then connect the black wire from the KIT to the BIG plug where you removed the black wire from and connect the red wire from the kit to the plug you removed the White/green wire from. See photo 3.
Written by Kristian (AUSTRALIA)
2018-01-21
- Product Review
This is a quality OEM item, with a well made harness. It works well, with 2 things to note. 1 - when the car is off, any lock-related signal will trigger the folding of the mirrors, such as unlocking the passenger door or all doors, not just locking. 2 - when starting the car, the mirrors will start unfolding for a split second, however they will stop until the engine starts, and then resume unfolding.
- Installation tips
Installation took me about 2 hours. Make sure you thoroughly read through the instructions, and look at all the illustrations. The trickiest part is re-pinning the connectors. Make sure you snap the connectors back together when you're done, otherwise some of the switches on the driver's door could stop working like they did for me.
Written by Chris (AUSTRALIA)
2017-11-06
- Product Review
Should have come this way from the factory!!!
Written by Rex (HONG KONG)
2017-08-28
- Product Review
After install this parts, the class if WRX S4 look like upgraded. When u lock the car the side mirror will close, when engine start the mirror will open automatically
- Installation tips
Since it related to existing wiring, it is connection, you have to find a car electrical workshop to assist installation.
Written by chi ming (HONG KONG)
2017-03-09
- Product Review
easy to install!! very good
Written by Christopher (AUSTRALIA)
2016-10-29
- Product Review
I installed this product myself. The mirrors fold in when you lock the car and open when you turn on the ignition. If you close the mirrors prior to turning off the ignition, the mirrors will not open automatically until you depress the button - this is good incase you park in a tight spot where the mirror will touch.
- Installation tips
Make sure you contact 'Ask About Product' Japanparts for English translated instructions! You must remove 2 wires from the factory loom connectors and tap a wire on the door lock.
Written by Fletcher (AUSTRALIA)
2016-08-03
- Product Review
Great product! Works as described and received an english translated manual from Japanparts for free! Had to get this installed by a professional though. If anyone lives in Sydney, and wants this mod installed professionally, I recommend MCCarSecurity (http://www.mccarsecurity.com.au/), they did a prestine job on the install - no issues.
- Installation tips
N/A, as I got it professionally installed by MCCarSecurity.
Items you recently viewed
Hello,Customer.
off: Office close *: Manufacture close
Payment methods
Spend less time at the register.
Be one of the first to pay with PayPal in stores.
It's the most flexible way to pay at your favorite
stores.
0 Item
- Product Review
Genuine Subaru part. Comes with everything needed to install expect for installation instruction. Just message japan parts and they will send you a copy. Pretty straight forward installation, just follow the instructions step by step and your good to go.
- Photo
- Installation tips
Installed on 2016 Wrx sti, requires swapping 2 plugs and tapping into 1.
Swap black plug 16pin from the car harness and replace with black wire from new harness. Swap middle plug 3pin from car harness and replace with red plug from new harness. The black plug and plug from 3pin goes back into the new plug include in kit. Plug and play and your good to go.