- Product Review
The factory lower subframe brace is fairly thin so these braces add a significant amount of rigidity.
- Photo
- Installation tips
The sides are swapped for a LHD car. Use only one set of spacers—the larger 10mm spaces, or the smaller 6mm spacers depending upon if your car has a bracket or not—USDM VA STi does not, so only the larger set.
Written by Michael (UNITED STATES)
2023-02-28
- Product Review
Outstanding s209 equipment. Goes well with the Front Flex Draw Stiffener. Highly recommend.
Written by Joris (NETHERLANDS)
2020-12-15
- Product Review
I installed this front support kit together with the STi performance pack and flexible draw stiffener as recommended. The kit can be installed without the other parts but will not reach it full potential. My car has transformed with these bits! Traction is MUCH better, comfort is higher, the car is more predictable. Still understeers at the limit, but you feel it coming now. Throttle can be applied much sooner out of corners. Pricy, but highly recommended!
- Photo
- Installation tips
Create some room under the car to loosen the necessary bolts for the middle support part. I circled the piece in yellow to clear the installation location (new bolts not tightened yet). The other two support parts are bolt on basically. Biggest challenge was to loosen the old bolts.
Written by Daniel (OMAN)
2019-09-09
- Product Review
Fantastic upgrade to my 2019 STI. Fantastic service from Japan Parts.
Written by Giorgio (ITALY)
2018-10-08
- Product Review
it worths what it costs. Much better this than any other sub frame
- Installation tips
it can be used on Forester as well
Written by Jonathan (UNITED STATES)
2016-01-21
- Product Review
Excellent chassis support on front subframe!
- Installation tips
Need to remove the engine under tray, use 14mm wrench to install and follow instructions on installation.
Written by Liheng (CHINA)
2015-11-16
- Product Review
The car is handling better after I installed it.
Amazing parts designed by STI.
Items you recently viewed
Hello,Customer.
off: Office close *: Manufacture close
Payment methods
Spend less time at the register.
Be one of the first to pay with PayPal in stores.
It's the most flexible way to pay at your favorite
stores.
0 Item
- Product Review
The factory lower subframe brace is fairly thin so these braces add a significant amount of rigidity.
- Photo
- Installation tips
The sides are swapped for a LHD car. Use only one set of spacers—the larger 10mm spaces, or the smaller 6mm spacers depending upon if your car has a bracket or not—USDM VA STi does not, so only the larger set.