Click on the image above to enlarge

Average 5

Total 7 reviews

Suspension & Steering

Control arms & Endlinks

Product Information: STI 20th Anniversary/ S207 use. To enforce the front cross member. As for BP/BL Legacy, it must be 2.0L turbo model.

Ask about Product: Inquiry for 1008P-004-005; Options :; Email Address:; Email Confirmation:; Chassis number/ Model code:; body:

We will contact you within 3 business days.
If you don't receive any reply from us,
send an inquiry form again

Rating Breakdown

All Stars

: - Product review
The factory lower subframe brace is fairly thin so these braces add a significant amount of rigidity.; - Photo; - Installation tips
The sides are swapped for a LHD car. Use only one set of spacers—the larger 10mm spaces, or the smaller 6mm spacers depending upon if your car has a bracket or not—USDM VA STi does not, so only the larger set.; Written by W (UNITED STATES) | 2024-12-03

: - Product review
Outstanding s209 equipment. Goes well with the Front Flex Draw Stiffener. Highly recommend.; Written by Michael (UNITED STATES) | 2023-02-28

: - Product review
I installed this front support kit together with the STi performance pack and flexible draw stiffener as recommended. The kit can be installed without the other parts but will not reach it full potential. My car has transformed with these bits! Traction is MUCH better, comfort is higher, the car is more predictable. Still understeers at the limit, but you feel it coming now. Throttle can be applied much sooner out of corners. Pricy, but highly recommended!; - Photo; - Installation tips
Create some room under the car to loosen the necessary bolts for the middle support part. I circled the piece in yellow to clear the installation location (new bolts not tightened yet). The other two support parts are bolt on basically. Biggest challenge was to loosen the old bolts.; Written by Joris (NETHERLANDS) | 2020-12-15
: ... Read all 7 customer review