JDM specialist Japanparts.com

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1Piece, with slit Pad: for race use Hose: Includes exclusive stainless steel mesh Teflon brake hose. For ROADSTER Model ND5RC, Eng.P5-VPR(RS), MY 05/2015 - For ROADSTER RF Model NDERC, Eng.PE-VPR(RS), MY 12/2016 - Remarks: - This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1Piece, with slit Pad: for street use Hose: Includes exclusive stainless steel mesh Teflon brake hose. For ROADSTER Model ND5RC, Eng.P5-VPR(RS), MY 05/2015 - For ROADSTER RF Model NDERC, Eng.PE-VPR(RS), MY 12/2016 - Remarks: - This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available.     1) For street use, low-dust, quieter and reduced rotor aggression.     2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.

Material: SUS304 Tip Material: Stainless Tip O.D.: φ108OVAL-2.5R Tip Piece: 2 Pipe Size: φ50 Consist of: 2 Close Sound Level (OEM/BLITZ): 75dB / 85dB Minimum Road Clearance : 153mm Weight (OEM/BLITZ): -kg / 8kg Silencer structure: Straight structure For ALTO WORKS, Model HA36S, R06A engine, MY 12/2015 - Remarks: For MT/AT. For 2WD only. Cut work OEM muffler is required for installation. BLITZ Rear Diffuser can be installed with this item. Available optional tips: φ108OVAL VSR TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62206 φ108OVAL VS TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62207 BLITZ NUR-SPEC CUSTOM EDITION Features: - All stainless SU304 muffler "NUR-SPEC" which is high quality mirror finish and high durability. - New stractures, tail pipe is separate from muffler. You can select optional 2type colors and volume. - The exhaust efficiency is raised by adopting a silencer with a straight structure, and powerful bass sound.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 5.0 Free length F/R: 180 / 185 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -50 to 0 / -55 to -30 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: C *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: - Stabilizer link with the product F/R: x / x BRAIN connection: x For MAZDA3 FASTBACK SEDAN, BP5P BP8P BPFP, P5-VPS S8-DPTS PE-VPS engine, MY 05/2019 - Remarks: For 2WD, Rear damping force dial locates in wheel well. For MAZDA3 FASTBACK 4WD, BP8P, S8-DPTS engine, MY 05/2019 - BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here　to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Center pipe included. Material: SUS304 Tip Material: Carbon Red Tip O.D.: φ101.6-2.5Rx2 Tip Piece: 2 Pipe Size: φ50 - φ50x2 Consist of: 4 Close Sound Level (OEM/BLITZ): 77dB / 87dB Minimum Road Clearance : 145mm, at silencer part Weight (OEM/BLITZ): 15.0kg / 14.5kg Silencer structure: Straight structure For SWIFT SPORT, Model ZC33S, K14C engine, MY 09/2017 - Available optional tips: φ101.6 VSR TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62204 φ101.6 VS TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62205 BLITZ NUR-SPEC CUSTOM EDITION Features: - All stainless SU304 muffler "NUR-SPEC" which is high quality mirror finish and high durability. - New stractures, tail pipe is separate from muffler. You can select optional 2type colors and volume. - The exhaust efficiency is raised by adopting a silencer with a straight structure, and powerful bass sound.

Material: SUS304 Tip Material: Carbon Red Tip O.D.: φ101.6-2.5R Tip Piece: 2 Pipe Size: φ50-φ50x2 Consist of: 3 Close Sound Level (OEM/BLITZ): 76dB / 90dB Minimum Road Clearance : 206mm Weight (OEM/BLITZ): 15.0kg / 9.9kg Silencer structure: Straight structure For VESEL Touring, Model RU1, L15B(Turbo) engine, MY 01/2019 - Available optional tips: φ101.6 VSR TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62204 φ101.6 VS TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62205 BLITZ NUR-SPEC CUSTOM EDITION Features: - All stainless SU304 muffler "NUR-SPEC" which is high quality mirror finish and high durability. - New stractures, tail pipe is separate from muffler. You can select optional 2type colors and volume. - The exhaust efficiency is raised by adopting a silencer with a straight structure, and powerful bass sound.

Material: SUS304 Tip Material: Stainless Tip O.D.: φ101.6-2.5R Tip Piece: 2 Pipe Size: φ50-φ50x2 Consist of: 3 Close Sound Level (OEM/BLITZ): 76dB / 90dB Minimum Road Clearance : 206mm Weight (OEM/BLITZ): 15.0kg / 9.9kg Silencer structure: Straight structure For VESEL Touring, Model RU1, L15B(Turbo) engine, MY 01/2019 - Available optional tips: φ101.6 VSR TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62204 BLITZ NUR-SPEC CUSTOM EDITION Features: - All stainless SU304 muffler "NUR-SPEC" which is high quality mirror finish and high durability. - New stractures, tail pipe is separate from muffler. You can select optional 2type colors and volume. - The exhaust efficiency is raised by adopting a silencer with a straight structure, and powerful bass sound.

Material: SUS304 Tip Material: Titanium color Tip O.D.: φ101.6-2.5R Tip Piece: 2 Pipe Size: φ50-φ50x2 Consist of: 3 Close Sound Level (OEM/BLITZ): 76dB / 90dB Minimum Road Clearance : 206mm Weight (OEM/BLITZ): 15.0kg / 9.9kg Silencer structure: Straight structure For VESEL Touring, Model RU1, L15B(Turbo) engine, MY 01/2019 - Available optional tips: φ101.6 VS TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62205 BLITZ NUR-SPEC CUSTOM EDITION Features: - All stainless SU304 muffler "NUR-SPEC" which is high quality mirror finish and high durability. - New stractures, tail pipe is separate from muffler. You can select optional 2type colors and volume. - The exhaust efficiency is raised by adopting a silencer with a straight structure, and powerful bass sound.

Core type: A3 For LC500 (except HYBRID) MY 03/2017- , Model URZ100, Eng.2UR-GSE BLITZ CARBON INTAKE SYSTEM Features: - Advanced forming technology, high-performance intake system with a carbon duct and the best fit case to the engine room. - With carbon duct and case, light weight, high strength, and properly control the intake air temperature. - Exclusive vehicle type duct and case efficiently capture the ram pressure and achieve a sharp intake response . - The air cleaner body uses a stainless steel mesh filter and realized the suction efficiency and racing sound. - Since the stainless steel filter can be re-use again and again if washed. Its ability is semi-permanent. - Carbon item makes engine room look nicer.

Core type: A3 For NX MY 09/2017- , Model AGZ10, AGZ15, Eng.8AR-FTS BLITZ CARBON INTAKE SYSTEM Features: - Advanced forming technology, high-performance intake system with a carbon duct and the best fit case to the engine room. - With carbon duct and case, light weight, high strength, and properly control the intake air temperature. - Exclusive vehicle type duct and case efficiently capture the ram pressure and achieve a sharp intake response . - The air cleaner body uses a stainless steel mesh filter and realized the suction efficiency and racing sound. - Since the stainless steel filter can be re-use again and again if washed. Its ability is semi-permanent. - Carbon item makes engine room look nicer.