JDM specialist Japanparts.com

Type: For Horizontally-opposed cylinder engine, High pressure type, B-8203, Filter size: φ80xH74, Center bolt size: M20xP1.5 (Vehicle) (Model Year) (Model) (Engine Model) (Stock part No.) 86 12/04- ZN6 FA20 SU003-00311 86 GR 17/12- ZN6 FA20 SU003-00311 86 GR SPORT 18/07- ZN6 FA20 SU003-00311 BLITZ RACING OIL FILTER features: Durability performance higher than specified in the JIS standard impulse durability test. Specially designed to maximize the filtration performance of the filter itself. Increased the filter strength. Lineup for various vehicle types. There is a range of fitments including popular Toyota, Subaru, Mitsubishi, Nissan, Honda, Mazda and Lexus engines.

Type: B-9271, Filter size: φ65xH65, Center bolt size: UNF3/4-16 (Vehicle) (Model Year) (Model) (Engine Model) (Stock part No.) HARRIER 97/12-00/11 SXU10W,SXU15W 5S-FE 90915-10003 HARRIER 00/11-03/02 ACU10W,ACU15W 2AZ-FE 90915-10004 HARRIER 03/02- ACU30W,ACU35W 2AZ-FE 90915-10004 HARRIER 17/06- ZSU60W,ZSU65W 3ZR-FAE 90915-10003 PRIUS 97/12-03/09 NHW10,NHW11 1NZ-FXE 90915-10003 PRIUS 03/09-09/05 NHW20 1NZ-FXE 90915-10003 PRIUSα 17/12- ZVW40W,ZVW41W 2ZR-FXE 90915-10003 PRIUS PHV 17/2- ZVW52 2ZR-FXE 90915-10003 BLITZ RACING OIL FILTER features: Durability performance higher than specified in the JIS standard impulse durability test. Specially designed to maximize the filtration performance of the filter itself. Increased the filter strength. Lineup for various vehicle types. There is a range of fitments including popular Toyota, Subaru, Mitsubishi, Nissan, Honda, Mazda and Lexus engines.

FULL KIT B06-380R turbine: ○ SUS POWER AIR CLEANER: ○ Exclusive intercooler kit: ○ Exclusive exhaust manihold: ○ Exclusive down pipe: ○ Catalyzer: with down pipe ECU: ○ Boost Controller: ○ SBC TypeS B06-380R turbine spec: Max.hp: 380PS Compressor Wheel: trim- 60.7, In Dia(mm)- 53, Ex. Dia(mm)- 68 Turbine Wheel: trim- 76.6, In Dia(mm)- 56, Ex. Dia(mm)- 49 For Toyota 86, ZN6, FA20 engine, 6MT Zenki(ealier model) and Koki(later model), Toyota 86 ZN6 6AT Zenki(ealier model). Not for 6AT Koki(later model). BLITZ TURBO SYSTEM Features: - Bolt-on turbo system that uses an actuator type metal flow turbine for 86 / BRZ. - It generates a maximum output of approximately 260 PS and a maximum torque of approximately 300 N/m, and powerful feeling at the range between low-medium speed to high rev. (* In the case of normal engine and setting by Blitz). - For a wide use from street to circuit by increasing power and torque by turbo. - BLITZ original B06-380R turbine use. The compressor housing is specially painted to reduce rust and dirt.- Equipped with turnbuckle original actuator as standard. Note: Please install the RACING OIL COOLER KIT RD at the same time provide sufficient cooling to prevent the turbine damage.

Spec: Mount F/R: Adjustable pillow / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 4.0 Free length F/R: 150 / 200 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -55 to 0 / -60 to -10 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: FF / x BRAIN connection: x For 86, ZN6, FA20 engine, MY 04/2012 - Remarks: For both models of Zenki (earlier model) and Koki (later model), Customizing trunk side panel of rear shock absorber upper is required, Sound gets louder due to pillow upper mounts BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here　to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Tip Piece: 4 Position: LS & RS Design: Circle, Inner curl Tip Material: Stainless Tip O.D.: 114.3-2.5R Pipe Size: 60-60×4 Consist of: 2 Close Sound Level (OEM/BLITZ): 82 / 94 For 86, ZN6, FA20 engine, MY 04/2012 - Remarks: For the vehicles equipped BLITZ Rear Diffuser/BLITZ Rear Bumper Spoiler , For the model before M/C and after M/C , Meets new Japanese regulation NUR-SPEC VS Features: - The polished sus304 tail produces an elegant rear view - Reasonable price - For some models, "Quad Model", 4 tails in the left and right is also available. - 2.5 R Curl Tail design meets new exterior technology standards

Shaft type:Hollow type For PRIUS, ZVW30, 2ZR-FXE engine, MY 05/2009 - 12/2015 Blitz Strut brace Features: Improve your cars handling with the new Blitz strut tower brace. Increases vehicle rigidity. Lightweight with hollow aluminium construction. 50mm wide X 15mm thick. Highly durable black finish with metallic red strut fixings. Also compatible with vehicle installed Blitz DAMPER ZZ-R SpecDSC

Filter type: Dry special paper (LMD). OEM part number: AY120-NS069 Low resistance filter using Blitz's original dry paper type filter. Improved suction efficiency by reducing air flow resistance significantly makes acceleration response sharp. Compatible Vehicle / MY / Model / Engine model CUBE 05/05-08/11 YZ11 HR15DE CUBE 08/11- Z12,NZ12 HR15DE CUBE CUBIC 05/05- YGZ11,YGNZ11 HR15DE SKYLINE HYBRID 14/02- HV37,HNV37 VQ35HR-HM34 *2pc required MARCH 05/08-10/07 YK12 HR15DE

Spec: Mount F/R: Adjustable pillow / Reinforced rubber Rate F/R(kgf/mm): 7.0 / 6.0 Free length F/R: 200 / 200 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -60 to 0 / -40 to +15 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: ○　It may not fit, depends on manufacture year. Please check the chart on BLITZ HP. Data is for WRX STI, VAB, EJ20 engine, MY 08/2014 - 06/2018 For VAB, EJ20, MY 08/2014 - 06/2018 VAB, EJ20, MY 06/2018 - VAF, EJ25, MY - Remarks: Removing or customizing some interior parts is required for rear motor installation. , Sound gets louder due to pillow upper mounts Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 6.0 Free length F/R: 220 / 200 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -70 to 0 / -55 to -10 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: ○　It may not fit, depends on manufacture year. Please check the chart on BLITZ HP. For XV, GP7, FB20 engine, MY 10/2012 - 05/2017 For XV HYBRID, GPE, FB20 engine, MY 06/2013 - Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 6.0 Free length F/R: 220 / 200 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -70 to 0 / -55 to -10 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: 100mm * Note: To install rear damping extension dial, drilling panels, speaker boards, etc. is required. Stabilizer link with the product F/R: x / x BRAIN connection: x For XV HYBRID, GPE, FB20 engine, MY 06/2013 - BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here　to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.