JDM specialist Japanparts.com

Tip Piece: 4 Position: LS & RS Design: Oval, Inner curl Tip Material: Stainless Tip O.D.: 108OVAL-2.5R Pipe Size: 50 Consist of: 3 Close Sound Level (OEM/BLITZ): 75 /85 For NOAH, ZWR80W, 2ZR-FXE engine, MY 01/2016 - Remarks: For HYBRID ZS, Meets new Japanese regulation NUR-SPEC VS Features: - The polished sus304 tail produces an elegant rear view - Reasonable price - For some models, "Quad Model", 4 tails in the left and right is also available. - 2.5 R Curl Tail design meets new exterior technology standards

Tip Piece: 2 Position: LS & RS Design: Circle, Inner curl Tip Material: Titanium colored stainless steel Tip O.D.: 114.3-2.5R Pipe Size: 60-50×2 Consist of: 2 Close Sound Level (OEM/BLITZ): 82 / 90 For 86, ZN6, FA20 engine, MY 04/2012 - Remarks: For the model before M/C and after M/C , Also for the vehicles equipped rear bumper garnish, Meets new Japanese regulation NUR-SPEC VSR Features: - SUS304 stainless steel muffler boasts high-quality shine by mirror finish and durability . - The titanium color tail by the new development is adopted. A vivid blue gradient of titanium color tail by Blitz's unique special coating technology. - For the pipe layout and silencer size, designed specifically for each model.

With gaskets (top and bottom) Replacement filter for BLITZ SUS POWER CORE TYPE LM E1/E2 CORE Part Number:Blue 56008, Red 56004

Spec: Core Type : TYPE JS (2 layer), Tube type Fin shape: Offset inner fin Core coating: None Pipe processing: Polished Side tank processing: Polished The joint pipe: Silicone 3-ply Hose band: Stainless steel For MARK II, JZX90, 1JZ-GTE engine, MY 10/1992 - 09/1996 Features: High Performance - realize there is no cooling performance compromise even at a low price Even in standard intercooler kit, and delivers the compare favorably performance to a higher model in the specs surface. Offset type of inner tube, adopting the outer fins of the louver type. In addition, all the aluminum pipe and the side tank subjected to the polishing process, the pipe joint has been achieved specs, such as to adopt a blue silicon of 3-ply.

Spec: Core Type : TYPE JS (2 layer), Tube type Fin shape: Offset inner fin Core coating: None Pipe processing: Polished Side tank processing: Polished The joint pipe: Silicone 3-ply Hose band: Stainless steel For MARK II, JZX100, 1JZ-GTE engine, MY 09/1996 - 10/2000 Features: High Performance - realize there is no cooling performance compromise even at a low price Even in standard intercooler kit, and delivers the compare favorably performance to a higher model in the specs surface. Offset type of inner tube, adopting the outer fins of the louver type. In addition, all the aluminum pipe and the side tank subjected to the polishing process, the pipe joint has been achieved specs, such as to adopt a blue silicon of 3-ply.

Spec: Core Type : TYPE JS (2 layer), Tube type Fin shape: Offset inner fin Core coating: None Pipe processing: Polished Side tank processing: Polished The joint pipe: Silicone 3-ply Hose band: Stainless steel For MARK II, JZX110, 1JZ-GTE engine, MY 10/2000 - Features: High Performance - realize there is no cooling performance compromise even at a low price Even in standard intercooler kit, and delivers the compare favorably performance to a higher model in the specs surface. Offset type of inner tube, adopting the outer fins of the louver type. In addition, all the aluminum pipe and the side tank subjected to the polishing process, the pipe joint has been achieved specs, such as to adopt a blue silicon of 3-ply.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 9.5 Free length F/R: 220 / 220 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -95 to 0 / -60 to -25 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: ○　It may not fit, depends on manufacture year. Please check the chart on BLITZ HP. The data is for ALPHARD, AGH35W, 2AR-FE engine, MY 01/2015 - 01/2018 For AGH35W, 2AR-FE, MY 01/2015 - 01/2018 GGH35W, 2GR-FE, MY 01/2015 - 01/2018 AGH35W, 2AR-FE, MY 01/2018 - GGH35W, 2GR-FKS, MY 01/2018 - AYH30W, 2AR-FXE, MY 01/2015 - 01/2018 AYH30W, 2AR-FXE, MY 01/2018 - Remarks: Able to install to side lift up seat equipped car, Since the wheelbase is 3000 mm, minimum ground clearance of 100 mm or more is required Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) TOYOTA 86 / 04.2012- / ZN6 / FA20 / -5° 00' - -2° 00' / -80 - -30 unconfirmed 86 with OEM 16inch wheel 86 GR / 12.2017- / ZN6 / FA20 / -5° 00' - -2° 00' / -80 - -30 86 GR SPORT / 07.2018- / ZN6 / FA20 / -5° 00' - -2° 00' / -80 - -30 Camber adjustable. When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required. Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice. The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment. BLITZ MIRACLE STROKE ADJUSTER Features: - Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster. - The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected. - To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height. - The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle. - Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.

For 86 GR, ZN6, FA20 engine, MY 12/2017 - Choose color, Blue (55714) or Red (55734). BLITZ SUCTION KIT Features: - By reconsidering the shape of the stock suction, internal resistance is reduced, suction efficiency is improved, and engine response is improved. - Bolt-on installation is possible with exclusive design. - Durability and safety are improved by aluminum main body and blue (or red) silicon for the joint. - Sporty engine room is nice.

For MARK II, JZX100, 1JZ-GTE engine, MY 09/1996 - 10/2000 Choose color, Blue (55713) or Red (55733). BLITZ SUCTION KIT Features: - By reconsidering the shape of the stock suction, internal resistance is reduced, suction efficiency is improved, and engine response is improved. - Bolt-on installation is possible with exclusive design. - Durability and safety are improved by aluminum main body and blue (or red) silicon for the joint. - Sporty engine room is nice.