Size: Φ200-SR/Red
Remarks: For SR air flow meter.
For SILVIA, S15, Engine SR20DET, MY 01/1999 - 08/2002
Check HKS page for details
Features:
-The most powerful intake system carefully designed to fit engine room of a vehicle. HKS Racing Suction pushes air intake system efficiency to the limits.
-Stealth frame is redesigned!
Surface area increased by approximately 27%.
-Bold white HKS logo printed on black anodized back plate accentuates the engine bay!
Real sports
TECHNOLOGY
Vehicle specific suction pipe design. Angle and length of pipe enhance the induction efficiency. It is effective for quick response for NA engines and higher performance for turbocharged engines.
Point
With stock suction system, induction air hit to corrugated portion of hose and makes swirl and resistance. The specially designed pipe reduces corrugated portion and gap inside pipe to make air flow smoother.
-Frame Support
-Racing suction adopted wet two-layer type
-Super Inner Frame
-Super Lip Funnel
Spec:
Core Size, Location: 390X270X100mm x2, Front mount
Type: GT1000SPEC
Remarks: Need separate piping kit (13002-AN003) Can install to a left‐hand drive car. Not checked for SPEC V.
Check HKS page for details
Spec:
Type: IC
Number of pipes: Inpipe x2, Out pipe x4
Remarks:Buff finish, SQV kit(71008-AN027) is included.
Check HKS page for details
INTERCOOLER PIPING KIT
Piping kit which replaces the pipes from the turbocharger to intercooler and the intercooler to inlet manifold. A convenient kit which allows the replacement of boost pipes which can frequently pop off in higher boost use and is recommended for tuning where the stock intercooler is still used.
Features:
HKS PIPNG KIT for Durability Increase and Consistent Boost Pressure under High Boost Condition.
Stock plastic or rubber intercooler pipes can expand or crack under high boost levels. In addition to this, stock pipes have many bends which in some places are very tight radius which causes much resistance and pressure drop. HKS Piping kits are made of aluminum for increased durability and safety. The pipes have been redesigned to decrease the number of bends and to increase bend radius to minimize pressure loss and flow resistance.
*Aluminum Pipes increase durability and safety.
Higher durability than the stock plastic pipes and increased safety can prevent possible damage to the pipe.
*Aluminum Pipes improve engine response.
Highly durable aluminum pipes prevent pipes' deforming under high boost pressure and intake air expansion and compression so the engine response can be improved.
*Buff, Alumite, and Plating Finished Pipes improve engine compartment appearance.
Buff, Alumite, and plating finished aluminum pipes can make the engine compartment appearance more attractive.
*Straight Layout and Appropriate Pipes' Radius minimize pressure loss.
The pipes have been redesigned to decrease the number of bends and to increase bend radius to minimize pressure loss and flow resistance.
*High Pressure Resistant Hoses improves intercooler's performance.
Installing high pressure resistance hoses to joint parts can protect the pipes from heat and pressure, so full performance of the intercooler can be brought out.
*By having almost same layout as the stock layout, installation procedure is very simple.
HKS Piping Kit can be installed as the same layout of the stock piping. So, no complicated installation procedure is required.
https://www.hks-power.co.jp/en/product/engine/v_belt/index.html
Only for cars equipped with stretch fit belt. The color of belt is black. You need the special tool included in the OEM belt set to mount this item.
Aluminum. In-pipe x2, Out-pipe x2. *Choose type. *EVO.8 MR also required: 281-142-017. Turbine-Intercooler, Intercooler-Surge tank. Increase the efficiency and performance over the factory intercooler pipe system. Higher boost pressure plus improved response are typical gains from installing an HKS intercooler pipe upgrade kit. Silicone hoses, stainless steel clamps and other hardware are included.
Parts number:
13002-AM002 Evo.9
13002-AM001 Evo.8 buff finish
13002-SM005 Evo.7 buff finish
0 Item
Please reload your browser if the view type does not change.
