JDM specialist Japanparts.com

For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) ALPHARD 4WD / 01.2015-01.2018 / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * ALPHARD 4WD / 01.2015-01.2018 / GGH35W / 2GR-FE / -3° 30' - -2° 00' / -85 - -40 * ALPHARD 4WD / 01.2018- / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * ALPHARD 4WD / 01.2018- / GGH35W / 2GR-FKS / -3° 30' - -2° 00' / -85 - -35 * ALPHARD HYBRID / 01.2015-01.2018 / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -85 - -40 * ALPHARD HYBRID / 01.2018- / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -90 - -45 * VELLFIRE 4WD / 01.2015-01.2018 / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * VELLFIRE 4WD / 01.2015-01.2018 / GGH35W / 2GR-FE / -3° 30' - -2° 00' / -85 - -35 * VELLFIRE 4WD / 01.2018- / AGH35W / 2AR-FE / -3° 30' - -2° 00' / -80 - -35 * VELLFIRE 4WD / 01/2018- / GGH35W / 2GR-FKS / -3° 30' - -2° 00' / -80 - -35 * VELLFIRE HYBRID / 01.2015-01.2018 / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -85 - -40 * VELLFIRE HYBRID / 01.2018- / AYH30W / 2AR-FXE / -3° 30' - -2° 00' / -90 - -45 * Remarks: Please install using the included spring. OEM stock wheel cannot be installed. Can be installed on side lift up seats Since the wheelbase is 3000mm, a minimum ground clearance of 100mm or more is required. * The camber adjustable range is the measured value when the camber is adjusted only with this product. * The vehicle height adjustment range is the data when the DAMPER ZZ-R is installed. * MIRACLE STROKE ADJUSTER can also be attached to "DAMPER ZZ-R BB". If it is installed due to the characteristics of this product, the minimum ground clearance may not be achieved because the vehicle height is lowered. When using this product and attaching a camber, it is necessary to adjust the toe to an appropriate value. For use outside the range of genuine toe adjustment, a separate toe adjustment arm may be required. Products and prices are subject to change without notice for improvement. In addition, the above models may be discontinued without notice. The camber adjustable range and vehicle height adjustable range may vary depending on individual vehicle differences and equipment. BLITZ MIRACLE STROKE ADJUSTER Features: - Optimizing the position of the lower arm, can be further ensured effective stroke of the spring, DAMPER ZZ-R series dedicated for the rear adjuster. - The width of the alignment is spread, suppression and of uneven wear, improvement of driving performance, a number of benefits, such as improved ride quality can be expected. - To eliminate some common stroke shortage at the time of Lowdown, also achieved a miraculous ride at a lower ride height. - The hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, can be finely adjusted camber angle. - Rear coil-over by optimizing the position of the lower arm, improved running performance by extending the same time movement of the suspension and to correct the roll center.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 9.0 / 8.0 Free length F/R: 200 / 220 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -90 to 0 / -90 to 0 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: ○　It may not fit, depends on manufacture year. Please check the chart on BLITZ HP. The data is for CROWN, GRS200,GRS202,GRS204, 4GR-FSE,3GR-FSE,2GR-FSE engine, MY 02/2008 - 12/2012 For GRS200,GRS202,GRS204, 4GR-FSE,3GR-FSE,2GR-FSE, MY 02/2008 - 12/2012 GRS210,GRS214, 4GR-FSE,2GR-FSE, MY 12/2012 - 10/2015 ARS210,GRS210,GRS214, 8AR-FTS,4GR-FSE,2GR-FSE, MY 10/2015 - 06/2018 GWS204, 2GR-FSE, MY 05/2008 - 01/2013 AWS210, 2AR-FSE, MY 01/2013 - 10/2015 AWS210, 2AR-FSE, MY 10/2015 - 06/2018 Remarks: Removing or customizing some interior parts is required for rear motor installation. Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

SPEC: Core type:E4 For 86, ZN6, FA20 engine, MY 04/2012 - Remarks: For Zenki and Koki (for both models of before/after minor change) Here is a link for replacement filter. Core type: E3 E4 FEATURES OF THE BLITZ SUS POWER AIR AIR CLEANER CORE-TYPE LM: - Reasonable price core type cleaner kit. - Filter color is Red. Blue and red 2 lineup. Excellent fashionability. - Replaceable with dry special fiber. - Combined with stainless steel realizes high durability and strength. - Replacement filters are available in blue and red. - Newly developed BLITZ´s original special two-layer fiber filter enhances high dust collection efficiency and suction efficiency. - Compatible models More than 140 domestic models. - Color variation- blue and red.,

Filter type: Dry special fiber (LM). Replacement type. OEM part number: 17801-22020, 16546-JB000 Double structure reinforced with stainless steel. Compatible Vehicle / MY / Model / Engine model BRZ 12/04-16/08 ZC6 FA20(Zenki MT) BRZ 12/04- ZC6 FA20(Zenki Koki AT)

Spec: Attachment height: 28mm For φ65 and φ70 (Vehicle) (Model Year) (Model) (Engine Model) (Center bolt) (O-ring size) COPEN XPLAY 14/11- LA400K KF-VET 3/4-16 φ65 COPEN CERO 15/06- LA400K KF-VET 3/4-16 φ65 COPEN ROBE 14/06- LA400K KF-VET 3/4-16 φ65 BLITZ OIL SENSOR ATTACHMENT features - This attachment is used when sandwiching TEMP sensor and PRESS sensor to oil filter. - Center bolt is included with both 3 / 4-16 and M20-P1.5 for Type D, M20-P1.5 only for Type H. - O-ring is compatible with both φ65 and φ70 sizes for Type D, φ65 size only for Type H. - 1/8 PT holes in the sensor mounting part. 3 places. - Type H is a type that gives the attachment a height. Sensors can also be attached to oil filters such as TOYOTA 86 and some SUBARU vehicles and HONDA S660. - Two 1/8 PT sunk head plug are included. - With "BLITZ" logo.

For CX-3, DK5FW,DK5AW, S5-DPTS engine, MY 02/2015 - For DEMIO, DJ5FS,DJ5AS, S5-DPTS engine, MY 10/2014 - Choose color, Blue or Red. BLITZ SUCTION KIT Features: - By reconsidering the shape of the stock suction, internal resistance is reduced, suction efficiency is improved, and engine response is improved. - Bolt-on installation is possible with exclusive design. - Durability and safety are improved by aluminum main body and blue (or red) silicon for the joint. - Sporty engine room is nice.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 8.0 / 6.0 Free length F/R: 180 / 160 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -50 to 0 / -85 to -35 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: x / x Please check the chart on BLITZ HP. The data is for ROADSTER, NA6CE,NA8C, B6-ZE,BP-ZE engine, MY 09/1989 - 01/1998 For NA6CE,NA8C, B6-ZE,BP-ZE, MY 09/1989 - 01/1998 NB6C,NB8C, B6-ZE,BP-ZE, MY 01/1998 - 08/2005 Remarks: Relocation of spare tire in the trunk is required, Optional transfer kit (code No. 15225) Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Spec: Mount F/R: Adjustable pillow / Reinforced rubber Rate F/R(kgf/mm): 7.0 / 5.0 Free length F/R: 200 / 220 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -55 to +20 / -50 to +20 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: 150mm * Note: To install rear damping extension dial, drilling panels, speaker boards, etc. is required. Stabilizer link with the product F/R: x / x BRAIN connection: x For IMPREZA, GC8, EJ20(Turbo) engine, MY 11/1992 - 08/2000 Remarks: Sound gets louder due to pillow upper mounts BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here　to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

SPEC: Core type:A1C For IMPREZA, GRB, EJ20 engine, MY 10/2007 - FEATURES OF THE BLITZ CARBON POWER AIR CLEANER: - Achieved high suction efficiency by a stainless steel mesh filter that has been proven with Suspower / Advance Power. - M-folded cone-shaped body that can maximize suction area. High level balance of dust collection performance and suction efficiency. - The carbon shield with the large diameter funnel blocks the radiant heat and prevents the heat generation of the filter main body, and reduces the intake air temperature rise. - Reduces heat generation of the shield itself by made of carbon. - Dress up the engine room with a combination of carbon shield and red alumite. - The filter part can be washed. Its performance continues semi-permanently.

Filter type: Dry special fiber (LM). Replacement type. OEM part number: 17801-21050 Double structure reinforced with stainless steel. Compatible Vehicle / MY / Model / Engine model IST 07/07- NCP110,NCP115,ZSP110 1NZ-FE,2ZR-FE VITZ 05/02-10/12 NCP91,NCP95 1NZ-FE,2NZ-FE VITZ 14/04- NSP130 1NR-FKE VITZ 10/12- NCP131 1NZ-FE VOXY 07/06-10/04 ZRR70W,ZRR70G,ZRR75W,ZRR75G 3ZR-FE,3ZR-FAE VOXY 10/04-14/01 ZRR70W,ZRR70G,ZRR75W,ZRR75G 3ZR-FAE VOXY 14/01- ZRR80W,ZRR80G,ZRR85W,ZRR85G 3ZR-FAE ESQUIRE 14/10- ZRR80G,ZRR85G 3ZR-FAE NOAH 07/06-10/04 ZRR70W,ZRR70G,ZRR75W,ZRR75G 3ZR-FE,3ZR-FAE NOAH 10/04-14/01 ZRR70W,ZRR70G,ZRR75W,ZRR75G 3ZR-FAE NOAH 14/01- ZRR80W,ZRR80G,ZRR85W,ZRR85W 3ZR-FAE HARRIER 13/12- ZSU60W,ZSU65W 3ZR-FAE BELTA 05/11- NCP96 2NZ-FE