JDM specialist Japanparts.com

80mm. For SR20DET. Only for M/T. Please choose the model: Parts number: 20551 for PS13/ RPS13/ S14 20552 for S15

80mm. For SR20DET. Only for M/T. Please choose the model: Parts number: 21551 for PS13/ RPS13/ S14 21552 for S15

For Turbo. Pipe size; center 80mm, tail 114.3mm. Shown picture is image.

All aluminum 42mm core. Radiator cap is included. Genuine electronic fan and fan shroud are possible to use. It has 1/8PT service hole to install water sensor. Please choose the model. As for GRF/GVF, Genuine air cleaner duct/ Blitz carbon suction are impossible to use. Also, Genuine ATF cooler hose can NOT connect so need ATF cooler kit 10304 () . Please choose the model from (#18852) GDB/A-B, (#18853) GDB/C-G, (#18857) BP5/BL5, (#18863) GRB/GRF/ GVB/GVF/ VAB or (#18867) ZC6

Only for before M/C which is before 05/09.

Only for before M/C which is before 05/09.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 4.3 Free length F/R: 220 / 258 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -80 to 0 / -65 to -27 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: ○　It may not fit, depends on manufacture year. Please check the chart on BLITZ HP. The data is for CX-5, KEEFW, PE-VPS engine, MY 02/2012 - 02/2017 For KEEFW, PE-VPS, MY 02/2012 - 02/2017 KEEAW, PE-VPS, MY 02/2012 - 02/2017 KE2FW, SH-VPTS, MY 02/2012 - 02/2017 KE2AW, SH-VPTS, MY 02/2012 - 02/2017 KE5FW, PY-VPS, MY 10/2013 - 02/2017 KE5AW, PY-VPS, MY 10/2013 - 02/2017 KF2P, SH-VPTS, MY 02/2017 - 03/2018 KF2P, SH-VPTS, MY 02/2017 - 03/2018 KF5P, PY-VPS, MY 02/2017 - 03/2018 KF5P, PY-VPS, MY 02/2017 - 03/2018 KF2P, SH-VPTS, MY 03/2018 - KF2P, SH-VPTS, MY 03/2018 - KF5P, PY-VPS, MY 03/2018 - KF5P, PY-VPS, MY 03/2018 - Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

SPEC: Core type:C3 For 86, ZN6, FA20 engine, MY 04/2012 - Remarks: For Zenki and Koki (for both models of before/after minor change) Here are links for attachment - Universal fit C1 C2 D60/70/80100, C3 C4 D60/70/80 - Air flow C1 C2 C3 C4 D80 FEATURES OF THE BLITZ SUS POWER AIR AIR CLEANER CORE-TYPE: - All stainless body. - SUS 304 stainless mesh shell & matrix structure. - Conical body that can maximize suction area. By adopting a mesh with a different matrix structure for the top and side, it increases the dust collection effect and the suction efficiency. - By drastically reducing inhalation resistance, we realized a sharp engine sound and a sporty intake sound. - It can be used again and again if washed.,

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 9.5 Free length F/R: 220 / 200 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -80 to 0 / -60 to -25 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: ○　It may not fit, depends on manufacture year. Please check the chart on BLITZ HP. Data is for ALPHARD, AGH30W, 2AR-FE engine, MY 01/2015 - 01/2018 For AGH30W, 2AR-FE, MY 01/2015 - 01/2018 GGH30W, 2GR-FE, MY 01/2015 - 01/2018 AGH30W, 2AR-FE, MY 01/2018 - GGH30W, 2GR-FKS, MY 01/2018 - AGH30W, 2AR-FE, MY 01/2015 - 01/2018 GGH30W, 2GR-FE, MY 01/2015 - 01/2018 AGH30W, 2AR-FE, MY 01/2018 - GGH30W, 2GR-FKS, MY 01/2018 - Remarks: 2WD, Able to install to side lift up seat equipped car, Since the wheelbase is 3000 mm, minimum ground clearance of 100 mm or more is required Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

For BLITZ DAMPER ZZ-R series. Spec: (VEHICELE) / (MY) / (MODEL) / (ENGINE) /(Camber adjustable range)/(DAMPER ZZ-R height adjustable range) BRZ / 03.2012- / ZC6 / FA20 / -5° 30' - 0° 00' / -55 - 0 BLITZ MIRACLE CAMBER ADJUSTER Features: - The camber angle of the suspension can be freely and easily changed, DAMPER ZZ-R series dedicated option bracket. -And for a front corresponding to the strut type suspension, set by vehicle type and for rear mounting on the lower arm mounting portion. - By moving the hole shape and dedicated bolt accordingly the vehicle type dedicated bracket employing the eccentric cam, simple and can be adjusted camber wide range stepless. - Freely by the camber angle can be adjusted, optimized ground conditions of the tire during low down width of alignment is widened, improving driving performance, suppression of uneven wear, also adjustment at wide wheel mounting easy. - Stay to secure the brake hose and ABS line is also standard equipment. Possible bolt mounted so Some models are also optimized mounting position of the stabilizer link.