Spec:
Caliper: Aluminum forged 4POT in metallic red
Disc: φ330 / 1pc, with slit
Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ
Hose:
Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment.
For WRX STI Model VAB, Eng.FA20.
Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease.
- Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle.
- The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance.
- Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction.
BLITZ BIG CALIPER KIT II Features:
- New designed brake caliper kit by exclusive model for further high braking ability and controllability.
- High-level "lightweight" and "high rigidity" by forging.
- Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition.
- Includes exclusive stainless steel mesh teflon brake hose.
- A bright metallic red calipers and black bell housings.
- Two types are available.
1) For street use, low-dust, quieter and reduced rotor aggression.
2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Spec:
Caliper: Aluminum forged 4POT in metallic red
Disc: φ330 / 1pc, with slit
Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ
Hose:
Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment.
For Civic Sedan, MY 09/2017 -, Model FC1, Eng. L15B, For Civic Hatchback, MY 09/2017 -, Model FK7, Eng. L15C.
Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease.
- By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance.
- Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle.
- The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance.
- Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction.
BLITZ BIG CALIPER KIT II Features:
- New designed brake caliper kit by exclusive model for further high braking ability and controllability.
- High-level "lightweight" and "high rigidity" by forging.
- Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition.
- Includes exclusive stainless steel mesh teflon brake hose.
- A bright metallic red calipers and black bell housings.
- Two types are available.
1) For street use, low-dust, quieter and reduced rotor aggression.
2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Spec:
Caliper: Aluminum forged 4POT in metallic red
Disc: φ355 / 1pc, with slit
Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ
Hose: Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment.
For NX, MY07/2014-, Model AGZ10 AGZ15 AYZ10 AYZ15, Eng. 8AR-FTS 2AR-FXE
Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease.
- By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance.
- Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle.
- The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance.
- Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction.
BLITZ BIG CALIPER KIT II Features:
- New designed brake caliper kit by exclusive model for further high braking ability and controllability.
- High-level "lightweight" and "high rigidity" by forging.
- Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition.
- Includes exclusive stainless steel mesh teflon brake hose.
- A bright metallic red calipers and black bell housings.
- Two types are available.
1) For street use, low-dust, quieter and reduced rotor aggression.
2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Model : Alphard H2#, Alphard H3#, VELLFIRE H3#, Harrier VU/SU6#
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec:
Caliper: Aluminum forged 4POT in metallic red
Disc: φ355 / 1pc, with slit
Pad: Non-asbestos ceramic composite, Rotor proper temperature range 0-450°C, Average friction coefficient 0.40 to 0.47µ
Hose:
Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment.
ALPHARD 2008/05-2015/01 ANH20W,ANH25W 2AZ-FE
ALPHARD 2008/05-2015/01 GGH20W,GGH25W 2GR-FE
ALPHARD 2015/01- AGH30W,AGH35W 2AR-FE
ALPHARD 2015/01- GGH30W,GGH35W 2GR-FE
ALPHARD G´s 2012/11-15/01 ANH20W 2AZ-FE
ALPHARD G´s 2012/11-15/01 GGH20W 2GR-FE
ALPHARD HYBRID 2011/11-15/01 ATH20W 2AZ-FXE
ALPHARD HYBRID 2015/01- AYH30W 2AR-FXE
VELLFIRE 2008/05-15/01 ANH20W,ANH25W 2AZ-FE
VELLFIRE 2008/05-15/01 GGH20W,GGH25W 2GR-FE
VELLFIRE 2015/01- AGH30W,AGH35W 2AR-FE
VELLFIRE 2015/01- GGH30W,GGH35W 2GR-FE
VELLFIRE G´s 2012/11-15/01 ANH20W 2AZ-FE
VELLFIRE G´s 2012/11-15/01 GGH20W 2GR-FE
VELLFIRE HYBRID 2011/11-15/01 ATH20W 2AZ-FXE
VELLFIRE HYBRID 2015/01- AYH30W 2AR-FXE
HARRIER 2013/12- ZSU60W,ZSU65W 3ZR-FAE
HARRIER 2017/06- ASU60W,ASU65W 8AR-FTS
HARRIER G´s 2015/01- ZSU60W,ZSU65W 3ZR-FAE
HARRIER HYBRID 2014/01- AVU65W 2AR-FXE
Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease.
- By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance.
- Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle.
- The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance.
- Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction.
BLITZ BIG CALIPER KIT II Features:
- New designed brake caliper kit by exclusive model for further high braking ability and controllability.
- High-level "lightweight" and "high rigidity" by forging.
- Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition.
- Includes exclusive stainless steel mesh teflon brake hose.
- A bright metallic red calipers and black bell housings.
- Two types are available.
1) For street use, low-dust, quieter and reduced rotor aggression.
2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
For stock Nissan exhaust.
Material: Titan
Shape: Slash
Tail diameter: φ130-2.5R×4
For GTR R35, VR38DETT engine, After MY 12/2007 - .
Note:
For Nissan stock genuine muffler.
Need to re-use genuine bands.
No NUR-SPEC logo.
Features:
Just replace the stock tail ends to BLITZ finishers.
It is possible to rotate the tail end in the range of 90° (No logo on the tail ends).
It possible to choose your favorite slash cut design in the vertical direction or the horizontal direction.
0 Item
Please reload your browser if the view type does not change.
