For CA18DE or CA18DET.
Qty per car: 1
Features:
By increasing the hardness of the rubber used in the mount bush, resistance to damage is naturally increased, as is reduced engine shake and lean during acceleration/ deceleration, braking and cornering; this provides improved
accelerator response, shift feeling and cornering performance.
Spec:
Same shape, bolt-on type as standard part.
Warning:
-Compared to standard parts, engine vibration is more likely to be transmitted into the automobile interior.
-Because an increased load is placed on the body side of the mount, any reinforcement to be done should be made before installing mount.
-Compared to standard parts, the rubber is a harder material, which may cause the engine position to rise by several millimeters.
Pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase.
For CA18DE or CA18DET.
Qty per car: 1
Features:
By increasing the hardness of the rubber used in the mount bush, resistance to damage is naturally increased, as is reduced engine shake and lean during acceleration/ deceleration, braking and cornering; this provides improved
accelerator response, shift feeling and cornering performance.
Spec:
Same shape, bolt-on type as standard part.
Warning:
-Compared to standard parts, engine vibration is more likely to be transmitted into the automobile interior.
-Because an increased load is placed on the body side of the mount, any reinforcement to be done should be made before installing mount.
-Compared to standard parts, the rubber is a harder material, which may cause the engine position to rise by several millimeters.
Pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase.
Price per a piece, Need 2piece per a car.
No.15 part in the picture.
Don't Need for HICAS car. Need press machine to install this part.
Warning:
-Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost, so even when repairing the vehicle replace both sides.
-When replacing the rear link, rear axle-side bush (no. 14 and 15) and suspension mount Bush (no. 16 and 17) should all be replaced with NISMO units at the same time. Replacing only the link will not draw out the full performance potential of the
suspension.
A set of left and right side.
No.11 part in the picture.
Not needed for HICAS-equipped vehicles
Shape and materials are the same as for standard parts.
NISMO reinforced Bush have been inserted.
Color: silver with NISMO sticker
Warning:
Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost, so even when repairing the vehicle replace both sides.
A set of left and right side.
No.3 part in the picture.
Shape and materials are the same as for standard parts.
NISMO reinforced Bush have been inserted.
Color: silver with NISMO sticker.
Warning:
Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost, so even when repairing the vehicle replace both sides.
A set of left and right.
No.1 part in the picture.
NISMO reinforced Bush have been inserted.
Color: silver with NISMO sticker.
** The stock brake air guide can not be installed. Because of the tension rod set (No.1) has no bracket for the installation. when installing, the clips ( Genuine Nissan part 41184-24U00, four units) are required. Please purchase separately.
Warning:
Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost, so even when repairing the vehicle replace both sides.
Mount bush assembly
Qty per car: 1
Features:
By increasing the hardness of the rubber used in the mount bush, resistance to damage is naturally increased, as is reduced engine shake and lean during acceleration/ deceleration, braking and cornering; this provides improved
accelerator response, shift feeling and cornering performance.
Spec:
Same shape, bolt-on type as standard part.
Warning:
-Compared to standard parts, engine vibration is more likely to be transmitted into the automobile interior.
-Because an increased load is placed on the body side of the mount, any reinforcement to be done should be made before installing mount.
-Compared to standard parts, the rubber is a harder material, which may cause the engine position to rise by several millimeters.
Pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase.
0 Item
Please reload your browser if the view type does not change.
