JDM specialist Japanparts.com

Need press machine to install this part. Price per a piece, Need 4 pieces No.14 part in the picture. Warning: -Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost; even when repairing the vehicle, replace both sides. -When replacing the rear link, rear axle-side Bush (14 and 15) and suspension mount Bush (16 and 17) should all be replaced with NISMO units at the same time. Replacing only the link will not draw out the full performance potential of the suspension.

Part #16 & #17 on the picture. Kit for one vehicle. Warning -When replacing the rear link, rear axle-side Bush (14 and 15) and suspension mount Bush (16 and 17) should all be replaced with NISMO units at the same time. Replacing only the link will not draw out the full performance potential of the suspension.

PTFE Hose + Stainless Mesh Parts Number: 46200-RSR25 BNR32 46200-RSR45 BCNR33 & BNR34

Spec: -PTFE Hose + Stainless Mesh -Fittings are olive-plated stainless steel All brake hoses for one vehicle (forward, back, left and right) Features: Shortening pedal stroke in high-load situations and improving pedal-touch response - NISMO’s newly-developed brake hose uses an exclusive stainless steel mesh construction. The hose is a highly reliable tightening-type, with the steel fittings olive plated to enhance anti-rust performance, and the bolt-on assembly meaning low cost as well as excellent hose durability and reliability. The hose layout was thoroughly considered for efficient and safe replacement work, and is the same as that used for genuine parts. Used as a set with NISMO R-tune will increase the total performance of the brake system. Warning: - These parts are an integral part of ensuring the safety of the vehicle as well as the public. Installaiton should be made by qualified staff of a designated or authorized shop, or have a inspection after installation by qualified staff of a designated or authorized shop. - The product is never to be installed on vehicles other than those listed in the application. - NISMO bears no responsibility for claims arising from defective installation, failure to bleed air from the system, or accidents arising from misuse.

Spec: -PTFE Hose + Stainless Mesh -Fittings are olive-plated stainless steel All brake hoses for one vehicle (forward, back, left and right) Features: Shortening pedal stroke in high-load situations and improving pedal-touch response - NISMO’s newly-developed brake hose uses an exclusive stainless steel mesh construction. The hose is a highly reliable tightening-type, with the steel fittings olive plated to enhance anti-rust performance, and the bolt-on assembly meaning low cost as well as excellent hose durability and reliability. The hose layout was thoroughly considered for efficient and safe replacement work, and is the same as that used for genuine parts. Used as a set with NISMO R-tune will increase the total performance of the brake system. Warning: - These parts are an integral part of ensuring the safety of the vehicle as well as the public. Installaiton should be made by qualified staff of a designated or authorized shop, or have a inspection after installation by qualified staff of a designated or authorized shop. - The product is never to be installed on vehicles other than those listed in the application. - NISMO bears no responsibility for claims arising from defective installation, failure to bleed air from the system, or accidents arising from misuse. Parts Number: 46200-RSS30 SR20DET (R)S13) 46200-RSS50 SR20DET (S15)

Material: FRP, White Gel Coating (Unpainted) They sells attachment parts separately. (#98100-RNS55-Z0) http://www.japanparts.com/db/partslist.php?KEYWORD=&dealer=&car=&middlesmall=&maker=&VOLKEY=1205G-272-016

GT L.S.D. is a basic model featuring fixed initial torque & internal pressure. Basic Model: Fixed (*1) initial torque & internal pressure *1 The design standard for initial torque output values is 8.0 kgf.m at the time of delivery. After the LSD is broken in and the plates are working well together, it will stabilize at 6.0 to 6.5 kgf.m. 20 large-diameter plates Increasing the number of plates to 20 makes the shift from slip to lock dramatically smoother. The diameter of the plates themselves, which are the actual slipping faces of the LSD, was augmented 55% over existing models. The result is a decreased load on each sliding face for a 30% gain in durability. Plate tooth design: the greatest tooth surface for the highest power efficiency The plates have 16 outside teeth which pick up the power input from the engine and eight interior teeth handle input from the road. The case and Side gear, which catch and hold the plate gears, have been set with ultimate precision, giving you a large-diameter plate LSD that completely controls slip judder. You will get stable, smooth, effective power and improved durability. Possibility of conversion between 2-WAY & 1.5-WAY Both 2-WAY and 1.5-WAY setups are available for purchase. By machining the pressure ring's cam angles, it is possible to convert between 2-WAY & 1.5-WAY after purchase (this will also require a unit overhaul). *With the 2-WAY, the LSD is effective whether accelerating or not. *With a 1.5-WAY, the LSD is effective only during acceleration. Special treatment for highest-quality plates A special heat treatment developed exclusively by NISMO is applied to all of the plate surfaces. This finish eliminates catching during slippage and ensures a smooth, linear operation. it keeps the plates working in harmony when they are first broken in, guarding against plate scorching as well as any loss of initial torque. High level of control The GT L.S.D. brings you more than just strength and efficiency. It also reduces power loss from occurring during time trials and provides the solid traction needed to attain higher cornering speeds. All of this will give you better angle control when drifting. GT L.S.D. cam angles Drive side/ Coast side: 55/1 (1.5WAY), 55/45(2WAY) This kit includes following NISMO or Nissan OEM parts: -Side flange x2 -Side bearing x2 -Oil seal x2 -Gasket x1 -Bolt x10 (use these bolts when the hole size of the ring gear bolt is M12) -COMPETITION OIL type 2189E (75W140) 1L x2 -GT L.S.D. sticker x2 For following models: RS13 - CA18DET engine RPS13 - SR20DET engine, after Sep.'95 (6 holes type), MT RPS13 - SR20DET engine, AT RPS13 - SR20DE engine, after Aug.'96 S13, PS13 - CA18DE engine, with ABS and without viscous LSD S13, PS13 - SR20DE engine, with ABS and without viscous LSD S13, PS13 - CA18DE engine, with viscous LSD S13, PS13 - SR20DE engine, with viscous LSD S13, PS13 - CA18DET engine S13, PS13 - SR20DET engine, AT S14 - SR20DE engine, with HICAS and without viscous LSD, before Dec. '96 S14 - SR20DE engine, without HICAS and with viscous LSD, before Dec. '96 S14 - SR20DE engine, with HICAS or with viscous LSD, after Dec. '96 S14 - SR20DET engine, AT S14 - SR20DET engine, MT S15 - SR20DE engine, with viscous LSD S15 - SR20DET engine, AT, with viscous LSD Parts Number: 38420-RS020-C 2WAY 38420-RS015-C 1.5WAY

Material: FRP, White Gel Coating (Unpainted). Comes with all the parts need to install.

Spec: Material: FRP, Black Gel Coating. Air cleaner duct available for Skyline GT-R (BNR34) Genuine air cleaner box Features: Reduces compressor intake pressure by 30% at the moment of boost pressure, also decreases air-path pressure. Easy installation: same as genuine NISSAN air cleaner (installation time 0.1 hours). Can be attached without modification when used with NISMO R-tune carbon hood, genuine aluminum hood, genuine carbon hood for V•spec, NISMO air inlet pipe or genuine inlet pipe. * No performance guarantee can be made if these parts are used with the engine hood or air inlet pipes of other manufactures.

Material: FRP, White Gel Coating (Unpainted), Includes Net