JDM specialist Japanparts.com

Thickness: 1.2mm. Stainless. It can also equip onto Spec C too.

A set of 2pc. With rubber boot.

Diameter: 40mm chromoly. 7 point, 5 passenger, Escape Dash.

Spec: Oval Shaft design. Lightweight aluminum made and high rigidity shaft. Steel made mount brackets in blue. Section shape type: 1 (Refer to an image) Remarks - Working with some interior is required. Cusco Strut bar features: Strut Tower Bars eliminate chassis flex at the most vital area of the car - between the strut towers, essentially to prevent the misalignment of suspension mounting points experienced during high cornering loads.

For CT9A 440 CUSCO PILLOW BALL UPPER MOUNT Features: With the normal rubber bush upper mounts, the geometry of the suspension will change and spoil the original performance of the suspension. CUSCO pillow ball upper mounts are highly rigid upper mounts that suppress the geometry change. - Improved Steering Response, Steering Force and Retaining Force - Ensures small steering angle response such as lane change and S-shaped turning - Improved stability by reducing vertical movement and roll while cornering - Improved road traceability and linear handling - Improved stability by reducing changes in suspension geometry during braking and corner entry

A set of front left and right. Easy bolt-on installation. Replacing OEM links. For Vitz, NCP91, MY 02/2005 - 12/2010, Drive System FF, Standard rod length: 360mm For Vitz, NCP131, MY 12/2010 - , Drive System FF, Standard rod length: 360mm For Aqua, NHP10, MY 12/2011 - , Drive System FF, Standard rod length: 360mm For Alphard Vellfire, ANH20W GGH20W, MY 05/2008 - 01/2015, Drive System FF, Standard rod length: 360mm For Alphard Vellfire, ANH25W GGH25W, MY 05/2008 - 01/2015, Drive System 4WD, Standard rod length: 360mm For Alphard Vellfire, AGH30W GGH30W, MY 01/2015 - , Drive System FF, Standard rod length: 360mm For Alphard Vellfire, AGH35W GGH35W, MY 01/2015 - , Drive System 4WD, Standard rod length: 360mm For Alphard Hybrid Vellfire Hybrid, ATH20W, MY 05/2008 - 01/2015, Drive System 4WD, Standard rod length: 360mm For Alphard Hybrid Vellfire Hybrid, AYH30W, MY 01/2015 - , Drive System 4WD, Standard rod length: 360mm Recommeded type: Type4 Type / Rod length / Adjustment Range / Part No. Type4 / 275mm / 345 - 375mm / 00B 318 A34 Remarks: Since the adjustable stabilizer link is 375 mm at the maximum, the link length can be up to + 15mm compared to the stock.Please be aware of this if the vehicle hieght is significantly lowered. This product is universal fit. The angle of the stabilizer varies depending on the parts that are installed (height controlled device, stabilizer, etc.) and the setting height. In consideration of the installed parts and conditions, select the rod makes the proper stabilizer angle. CUSCO ADJUSTABLE SWAY BAR LINK UNIVERSAL TYPE Features: Corrects the stabilizer angle during lower height to an proper one. The stabilizer mounting angle, which changes when the height of vehicle is changed, is adjusted to the optimum angle in millimeters for the original performance and effects of the stabilizer.

Aluminum Oval shaft. The image shown is for illustrative purposes only. Parts number: 684 540 A BP5/BL5, 686 540 A BPE/BLE

RHD only. Oval shaft al-carbon strut bar. Shaft: aluminum + carbon. Section shape: oval. Plate: Steel in titan color. Bolt-on type. Integrated Brake cylinder stopper. Need to process engine cover.

SPEC: Blue painted high strength steel Bolt on installation Tighten with rear seat bracket and anchor bracket for child. Note: - Working of the interior is necessary to install. (seat bracket side cover + rear trunk foaming tray) - This product protrudes above the trunk floor surface. Please note that loading of loads may be affected, such as when defeating the seat back and using it flat. - When attaching to the revog, adjustment of the final third stage of the reclining mechanism of the rear seat becomes difficult due to the interference of the stay to the seat back. When using this product, please use it in the reclining up to the 2nd step. For Subaru WRX STI (VAB), 08.2014- / 4WD / 2.0L(Turbo) Subaru Levorg (VM4), 08.2014- / 4WD / 1.6L(Turbo) Subaru Levorg (VMG), 08.2014- / 4WD / 2.0L(Turbo) FEATURES - Improved the body rigidity of the rear section by tightly connecting the left and right rear side members. - More rear traction by reducing the twist of the body - Improve control of the vehicle - 4-point seat belt anchor for shoulder belt (*) *Notes - When using a 4-point seat belt it is necessary to defeat the rear seat back. - When using the anchor part of this product as a 4 point type (or more) as a seat belt attachment point, be sure to use it as a shoulder belt. Please do not use for the waist belt absolutely. (Power brace seat rail plus 6A1-492-SP is recommended for hip belts installation) - When using a 4 point type (or more) seat belt, please install according to the instruction manual of the seat belt to be used.

Aluminum.