Model : S14, S15
Delivery time by Air : 10-15 days
Category : Sway bars
With Reinforced Bush (Body Side) Front: Diameter=30.0, Spring Rate=101.2mm(10.3kgf/mm) Rear: Diameter=23.0, Spring Rate=43.1mm(4.4kgf/mm)
Please input your Email address and password.
Model : S15 for SR20DET
Delivery time by Air : 10-15 days
Category : Clutches & Flywheels
The strongest single clutch: one that can handle the 420ps, SR20DET engine but is still easy to operate. This was the development concept for the SUPER COPPERMIX. With an allowable torque of 54 kgf·m, this is the strongest single clutch Allowable torqueN.m (kgf.m) - Kinetic friction: 530(54) / Static friction: 794(81) Allowable output kW (ps): 309(420) Clutch cover - Pressure N・m (kgf): 9807(1000) - Type: Push Kit Contents: COPPERMIX clutch disc/ Aluminum clutch cover/ Lightweight flywheel/ Flywheel bolts/ Release bearing (genuine Nissan part)/ Sticker Warning: - The sports clutch discs and light weight flywheels, which are designed and manufactured to increase capacity for higher outputand to improve clutch response, may cause the transmission or bearings to make a rumbling noise which is not present when using the original Nissan production parts. Such noise is particularly likely to occur when idling or when accelerating and decelerating at around 2000 rpm. Please be aware that this rumbling is not due to any defect in the parts. - Do not use the SUPER COPPERMIX with a Big Operating Cylinder. This can result in blocking proper disengagemnt of the gears because of insufficient stroke volume. As for S15 6MT, the Dual mass flywheel (with damper spring) is installed. When clutches are exchanged, the allophone is generated. Because the flywheel of Nismo is a solid type.
Please input your Email address and password.
Model : S15 for SR20DET
Delivery time by Air : 10-15 days
Category : Clutches & Flywheels
Corresponding up to 380ps, Aluminum Cover (Strap Type) /800kgf, Coppermix=240mm(diameter). As for S15 6MT, the Dual mass flywheel (with damper spring) is installed. When clutches are exchanged, the allophone is generated. Because the flywheel of Nismo is a solid type.
Please input your Email address and password.
Model : S13
Delivery time by Air : 10-15 days
Category : Control arms & Endlinks
A set of left and right. No.1 in the picture. Part shape and materials are identical with standard parts. NISMO reinforced Bush have been inserted. Silver color, with NISMO sticker. Warning: Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost; even when repairing the vehicle, replace both sides.
Please input your Email address and password.
Model : S13
Delivery time by Air : 14-21 days
Category : Control arms & Endlinks
A set of left and right. No.3 part in the picture. Part shape and materials are identical with standard parts. NISMO reinforced Bush have been inserted. Silver color, with NISMO sticker. Warning Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost; even when repairing the vehicle, replace both sides.
Please input your Email address and password.
Model : Z33
Delivery time by Air : 10-15 days
Category : Cargo nets & Trays & Mats
*Won't fit on LHD(Left Hand Drive), Only for RHD, Z33 (AT & MT) Price is set of 2.
Please input your Email address and password.
Model : V35
Delivery time by Air : 10-15 days
Category : Cargo nets & Trays & Mats
Only for RHD. Both Sedan & Coupe (before MY2004/11) with AT Power Seat. To install this to sedan, rear center mat and rear seat has a little bit of space but still possible to install.
Please input your Email address and password.
Model : K11, HK11, AK11 except4WD, CV
Delivery time by Air : 10-15 days
Category : Engine mounts
Push unit, press-in type On 4WD and CVT vehicles, installation is not possible on the front left side Qty per car: 2 Features: By increasing the hardness of the rubber used in the mount bush, resistance to damage is naturally increased, as is reduced engine shake and lean during acceleration/ deceleration, braking and cornering; this provides improved accelerator response, shift feeling and cornering performance. Spec: Same shape, bolt-on type as standard part. Warning: -Compared to standard parts, engine vibration is more likely to be transmitted into the automobile interior. -Because an increased load is placed on the body side of the mount, any reinforcement to be done should be made before installing mount. -Compared to standard parts, the rubber is a harder material, which may cause the engine position to rise by several millimeters. Pictures are typical examples. Actual part may differ from the pictures shown. Please check the part number when you purchase.
Please input your Email address and password.
Model : All 2WD vehicles (except 12SR from Aug.’05,15SR-A)
Delivery time by Air : 10-15 days
Category : Lines
Spec: -PTFE Hose + Stainless Mesh -Fittings are olive-plated stainless steel All brake hoses for one vehicle (forward, back, left and right) Features: Shortening pedal stroke in high-load situations and improving pedal-touch response - NISMO’s newly-developed brake hose uses an exclusive stainless steel mesh construction. The hose is a highly reliable tightening-type, with the steel fittings olive plated to enhance anti-rust performance, and the bolt-on assembly meaning low cost as well as excellent hose durability and reliability. The hose layout was thoroughly considered for efficient and safe replacement work, and is the same as that used for genuine parts. Used as a set with NISMO R-tune will increase the total performance of the brake system. Warning: - These parts are an integral part of ensuring the safety of the vehicle as well as the public. Installaiton should be made by qualified staff of a designated or authorized shop, or have a inspection after installation by qualified staff of a designated or authorized shop. - The product is never to be installed on vehicles other than those listed in the application. - NISMO bears no responsibility for claims arising from defective installation, failure to bleed air from the system, or accidents arising from misuse.
Please input your Email address and password.
Model : Z33 & CPV35 (with Brembo)
Delivery time by Air : 10-15 days
Category : Lines
For Z33(Vehicles equipped with Brembo calipers, untill Jan.'07) & CPV35 (Vehicles equipped with Brembo calipers) Spec: -PTFE Hose + Stainless Mesh -Fittings are olive-plated stainless steel All brake hoses for one vehicle (forward, back, left and right) Features: Shortening pedal stroke in high-load situations and improving pedal-touch response - NISMO’s newly-developed brake hose uses an exclusive stainless steel mesh construction. The hose is a highly reliable tightening-type, with the steel fittings olive plated to enhance anti-rust performance, and the bolt-on assembly meaning low cost as well as excellent hose durability and reliability. The hose layout was thoroughly considered for efficient and safe replacement work, and is the same as that used for genuine parts. Used as a set with NISMO R-tune will increase the total performance of the brake system. Warning: - These parts are an integral part of ensuring the safety of the vehicle as well as the public. Installaiton should be made by qualified staff of a designated or authorized shop, or have a inspection after installation by qualified staff of a designated or authorized shop. - The product is never to be installed on vehicles other than those listed in the application. - NISMO bears no responsibility for claims arising from defective installation, failure to bleed air from the system, or accidents arising from misuse.
Please input your Email address and password.
Who we are
How to order