JDM specialist Japanparts.com

Hose for NISMO variable pressure regulator (general-purpose type) Rubber hose for fuel line. Internal diameter φ7.5 L=1m Genuine Nissan part

Application: with Brembo calipers ONLY Coefficient of friction: 0.3 - 0.5um Permissible temperature range(rotor suitable temperature): from Ordinary temperature to 500C Application caliper: Nissan OEM caliper Features: NON-ASBESTOS ORIGINAL NON-ASBESTOS FRICTION MATERIAL LESS BRAKING NOISE FOR ALL CLIMATES CLEANER WHEELS

For R32 RB20DET、RB25DE R33 RB25DET、RB25DE（GT-S S/S） R34 RB25DET、RB25DE（GTV） BNR32 RB26DETT (EXCEPT V spec, V spec II) Z32 Coefficient of friction: 0.3 - 0.5um Permissible temperature range(rotor suitable temperature): from Ordinary temperature to 500C Application caliper: Nissan OEM caliper Features: NON-ASBESTOS ORIGINAL NON-ASBESTOS FRICTION MATERIAL LESS BRAKING NOISE FOR ALL CLIMATES CLEANER WHEELS

With Reinforced Bush (Body Side) Front: Diameter=30.0, Spring Rate=101.2mm(10.3kgf/mm) Rear: Diameter=23.0, Spring Rate=43.1mm(4.4kgf/mm)

The strongest single clutch: one that can handle the 420ps, SR20DET engine but is still easy to operate. This was the development concept for the SUPER COPPERMIX. With an allowable torque of 54 kgf·m, this is the strongest single clutch Allowable torqueN.m (kgf.m) - Kinetic friction: 530(54) / Static friction: 794(81) Allowable output kW (ps): 309(420) Clutch cover - Pressure N・m (kgf): 9807(1000) - Type: Push Kit Contents: COPPERMIX clutch disc/ Aluminum clutch cover/ Lightweight flywheel/ Flywheel bolts/ Release bearing (genuine Nissan part)/ Sticker Warning: - The sports clutch discs and light weight flywheels, which are designed and manufactured to increase capacity for higher outputand to improve clutch response, may cause the transmission or bearings to make a rumbling noise which is not present when using the original Nissan production parts. Such noise is particularly likely to occur when idling or when accelerating and decelerating at around 2000 rpm. Please be aware that this rumbling is not due to any defect in the parts. - Do not use the SUPER COPPERMIX with a Big Operating Cylinder. This can result in blocking proper disengagemnt of the gears because of insufficient stroke volume. As for S15　6MT, the Dual mass flywheel (with damper spring) is installed. When clutches are exchanged, the allophone is generated. Because the flywheel of Nismo is a solid type.

Corresponding up to 380ps, Aluminum Cover (Strap Type) /800kgf, Coppermix=240mm(diameter). As for S15　6MT, the Dual mass flywheel (with damper spring) is installed. When clutches are exchanged, the allophone is generated. Because the flywheel of Nismo is a solid type.

A set of left and right. No.1 in the picture. Part shape and materials are identical with standard parts. NISMO reinforced Bush have been inserted. Silver color, with NISMO sticker. Warning: Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost; even when repairing the vehicle, replace both sides.

A set of left and right. No.3 part in the picture. Part shape and materials are identical with standard parts. NISMO reinforced Bush have been inserted. Silver color, with NISMO sticker. Warning Always replace both left and right link and Bush at the same time. If only one side is replaced, the left-right balance of the suspension is lost; even when repairing the vehicle, replace both sides.

*Won't fit on LHD(Left Hand Drive), Only for RHD, Z33 (AT & MT) Price is set of 2.

Only for RHD. Both Sedan & Coupe (before MY2004/11) with AT Power Seat. To install this to sedan, rear center mat and rear seat has a little bit of space but still possible to install.