JDM specialist Japanparts.com

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 10.0 / 6.0 Free length F/R: 180 / 180 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -55 to -10 / -55 to 0 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For CIVIC TYPE R, EK9, B16B engine, MY 08/1997 - 09/2000 Remarks: Removing some interior parts is required for adjustment rear damping force BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here　to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 10.0 / 8.0 Free length F/R: 200 / 200 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -60 to +10 / -40 to +10 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For RX-7, FD3S, 13B-REW engine, MY 12/1991 - BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here　to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 8.0 / 6.0 Free length F/R: 180 / 160 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -50 to 0 / -85 to -35 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For ROADSTER, NA6CE,NA8C, B6-ZE,BP-ZE engine, MY 09/1989 - 01/1998 BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here　to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 8.0 / 6.0 Free length F/R: 180 / 160 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -50 to 0 / -85 to -35 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: x For ROADSTER, NB6C,NB8C, B6-ZE,BP-ZE engine, MY 01/1998 - 08/2005 BLITZ DAMPER ZZ-R features: - Single cylinder type (monotube) structure. The entire length adjustable suspension kit. - Reasonable price. - 32 levels damping force adjustment mechanism was adopted, it allows a wide range damping force adjustment. For all driving scene from the street use to car racing. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ44 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here　to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Material: FRP. Unpainted. White gel coat finish. Reamrks: To install the trunk spoiler, removing manufacture emblem is required. For SKYLINE, RV37, VR30DDTT eng., For both of Earlier model and Later model. For SKYLINE 400R, RV37, VR30DDTT eng., MY 09/2019 - , Later (Koki) model.

Main pipe diameter: 60.5-70. Tail diameter 120. 95dB

1.3kgf/cm2 (127kpa). TYPE2 RED. For BRZ  ZC6  FA20  MY(month/year)12/03-

Material: FRP. Unpainted. White gel coat finish. Side bottom - 25mm lower, Rear bottom - 40mm lower. Remarks: To install the rear diffuser, it is necessary to process the normal bumper. In addition, it is necessary to install the dedicated NUR-SPEC Custom Edition. For SKYLINE, RV37, VR30DDTT eng., MY 09/2019 - , Later (Koki) model. For SKYLINE 400R, RV37, VR30DDTT eng., MY 09/2019 - , Later (Koki) model.

Material: FRP. Unpainted. White gel coat finish. For COROLLA SPORT, NRE210H NRE214H, 8NR-FTS eng., FF/4WD, MY 06/2018 - For COROLLA SPORT HYBRID, ZWE211H, 2ZR-FXE eng., MY 06/2018 -

For stock Toyota exhaust. Material: Titan Tail diameter: φ110-2.5R×2 Choose the type. PN 63188V, for SUPRA RZ, Model: 3BA-DB42, Engine: B58, MY 05/2019 - PN 63189V, for SUPRA SZ-R SZ, Model: 3BA-DB22 3BA-DB82, Engine: B48, MY 05/2019 - Note: For Toyota stock genuine muffler. Need to re-use genuine bands. No NUR-SPEC logo. Features: Just replace the stock tail ends to BLITZ finishers. It is possible to rotate the tail end in the range of 90° (No logo on the tail ends). It possible to choose your favorite slash cut design in the vertical direction or the horizontal direction.