Japanparts No : 135-2013-006-2
Model : ZN6
Delivery time by Air : 21-28 days
Category : Body kits
Both front and rear pair set. Front: 40mm (one side), Rear 60mm (one side). Material: FRP (Unpainted) but canard is carbon.
Please input your Email address and password.
Model : CZ4A
Delivery time by Air : 28-35 days
Category : Body kits
Material: FRP. Unpainted. Including mesh grille net.
Please input your Email address and password.
Model : Z33 Before M/C
Delivery time by Air : 20-25 days
Category : Body kits
Only for before M/C which is before 05/09.
Please input your Email address and password.
Model : Z33 Before M/C
Delivery time by Air : 20-25 days
Category : Body kits
Only for before M/C which is before 05/09.
Please input your Email address and password.
Model : ND5RC NDERC
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1Piece, with slit Pad: for race use Hose: Includes exclusive stainless steel mesh Teflon brake hose. For ROADSTER Model ND5RC, Eng.P5-VPR(RS), MY 05/2015 - For ROADSTER RF Model NDERC, Eng.PE-VPR(RS), MY 12/2016 - Remarks: - This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Model : VAG, VAB
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 6POT in metallic red Disc: φ355 / 2pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For WRX S4 Model VAG, Eng. FA20, WRX STI Model VAB, Eng.FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Model : FC1, FK7
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For Civic Sedan, MY 09/2017 -, Model FC1, Eng. L15B, For Civic Hatchback, MY 09/2017 -, Model FK7, Eng. L15C. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Model : ZC33S
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For Swift Sports, MY 09/2017 -, Model ZC33S, Eng. K14C. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Model : ZN6
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For Toyota 86, 86GR, 86GR SPORT, Model ZN6, Eng. FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - By installing this kit, you can not attach a genuine wheel. Please verify in advance whether the clearance of the wheel to be attached can be secured in advance. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Model : VAB
Delivery time by Air : 14-21 days
Category : Rotors/ Calipers
Spec: Caliper: Aluminum forged 4POT in metallic red Disc: φ330 / 1pc, with slit Pad: Carbon metal ceramic, Rotor proper temperature range 0-680°C, Average friction coefficient 0.35 to 0.55μ Hose: (Front/Rear) Includes exclusive stainless steel mesh Teflon brake hose. A cover is attached to the mesh hose and socket joint, and the dynamic stress on the caulked part is reduced and the durability is greatly improved. In addition, the fixing of the middle part of the hose also uses a exclusive metal fitting, which enables reliable attachment. For WRX STI Model VAB, Eng.FA20. Remarks:This kit contains all the parts needed for installation, but does not contain chemicals such as brake fluid and brake grease. - Processing of the back plate is required. Although the processing method is free, please be careful not to deform the remaining part or leave a piece in the vehicle. - The front center bell housing is anodized (some models only). Alumite may peel off or fade away due to continuous high temperature conditions caused by circuit driving etc. Please note that there is no impact on performance. - Due to the nature of the pad when it is cold or when the brake pad is wet, brake noise may occur, but this is not a malfunction. BLITZ BIG CALIPER KIT II Features: - New designed brake caliper kit by exclusive model for further high braking ability and controllability. - High-level "lightweight" and "high rigidity" by forging. - Slit rotors realize high "heat dissipation". The fade phenomenon is suppressed and the braking force of the pad is kept in the optimum condition. - Includes exclusive stainless steel mesh teflon brake hose. - A bright metallic red calipers and black bell housings. - Two types are available. 1) For street use, low-dust, quieter and reduced rotor aggression. 2) For racing use, superior in initial braking and enables higher braking power. The racing use has realized about 7% more braking power than the street use.
Please input your Email address and password.
Who we are
How to order