JDM specialist Japanparts.com

Spec: Mount F/R: Adjustable pillow / Fixed pillow Rate F/R(kgf/mm): 8.0 / 7.0 Free length F/R: 135 / 180 Spring F/R: ID62 straight spring / ID62 straight spring Height adjustment range F/R: -50 to -10 / -45 to 0 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: A *Refer to the 5th image for the position and shape. The image is representative model. Extension dial with the product: x Stabilizer link with the product F/R: FA / x BRAIN connection: x For BRZ, ZC6, FA20 engine, MY 03/2012 - Remarks: For both models of Zenki (earlier model) and Koki (later model), Sound gets louder due to pillow upper mounts BLITZ DAMPER ZZ-R Spec-C features: - Shock absorber of full length adjustment adopted single cylinder type (monotube). Independent expansion and contraction 32 levels damping force adjustable. - 2WAY 32 levels damping force adjustment mechanism extension side and compression side independently. For all driving scene from the street use to car racing by high level balancing the damping force. * At the extension side of the damping dial, the damping force changes at the same time as it expands and contracts. - Separate tank type structure increases the amount of oil. Full damping force even in very low speed range. To reduce troubles during installation, the peculiar hose line structure to the separate tank is abolished. - Aluminum upper mount, lock seat, the bracket (except some models) achieve both high strength and light weight. - φ46 diameter piston of the single-cylinder type suppress damping force lag.(except for some models) For more info, Click here　to check BLITZ HP Note: - It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur. - When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires. - When installing the DAMPER ZZ-R Spec-C series, the separate tank may interfere. (depending on wheel or tire size). Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Main pipe diameter: 60.5-70. Tail diameter 120. 95dB

1.3kgf/cm2 (127kpa). TYPE2 RED. For BRZ  ZC6  FA20  MY(month/year)12/03-

Material: FRP (un-painted). LED Daylight, mesh grille net and so on are included.

Both front and rear pair set. Front: 40mm (one side), Rear 60mm (one side). Material: FRP (Unpainted) but canard is carbon.

Material: FRP. Unpainted. White gel coat finish. Side bottom - 25mm lower, Rear bottom - 40mm lower. Remarks: To install the rear diffuser, it is necessary to process the normal bumper. In addition, it is necessary to install the dedicated NUR-SPEC Custom Edition. For SKYLINE, RV37, VR30DDTT eng., MY 09/2019 - , Later (Koki) model. For SKYLINE 400R, RV37, VR30DDTT eng., MY 09/2019 - , Later (Koki) model.

Material: FRP. Unpainted. White gel coat finish. For COROLLA SPORT, NRE210H NRE214H, 8NR-FTS eng., FF/4WD, MY 06/2018 - For COROLLA SPORT HYBRID, ZWE211H, 2ZR-FXE eng., MY 06/2018 -

Material: CFRP. For S660, JW5 both of earlier (Zenki) model and later (Koki) model, except Modulo X.

For stock Toyota exhaust. Material: Titan Tail diameter: φ110-2.5R×2 Choose the type. PN 63188V, for SUPRA RZ, Model: 3BA-DB42, Engine: B58, MY 05/2019 - PN 63189V, for SUPRA SZ-R SZ, Model: 3BA-DB22 3BA-DB82, Engine: B48, MY 05/2019 - Note: For Toyota stock genuine muffler. Need to re-use genuine bands. No NUR-SPEC logo. Features: Just replace the stock tail ends to BLITZ finishers. It is possible to rotate the tail end in the range of 90° (No logo on the tail ends). It possible to choose your favorite slash cut design in the vertical direction or the horizontal direction.

For stock Nissan exhaust. Material: Titan Shape: Slash Tail diameter: φ130-2.5R×4 For GTR R35, VR38DETT engine, After MY 12/2007 - . Note: For Nissan stock genuine muffler. Need to re-use genuine bands. No NUR-SPEC logo. Features: Just replace the stock tail ends to BLITZ finishers. It is possible to rotate the tail end in the range of 90° (No logo on the tail ends). It possible to choose your favorite slash cut design in the vertical direction or the horizontal direction.