JDM specialist Japanparts.com

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 9.5 Free length F/R: 220 / 180 Spring F/R: Barrel or Taper type exclusive spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -90 to 0 / -64 to -20 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: FF / x BRAIN connection: ○　It may not fit, depends on manufacture year. Please check the chart on BLITZ HP. For ODYSSEY, RC1, K24W engine, MY 11/2013 - Remarks: 2WD, Removing or customizing some interior parts is required for rear motor installation. Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Spec: Mount F/R: Reinforced rubber / Reinforced rubber Rate F/R(kgf/mm): 6.0 / 8.5 Free length F/R: 220 / 220 Spring F/R: Barrel or Taper type exclusive spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -100 to 0 / -60 to -20 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: FF / x BRAIN connection: ○　It may not fit, depends on manufacture year. Please check the chart on BLITZ HP. For ODYSSEY, RC2, K24W engine, MY 11/2013 - Remarks: 4WD, Removing or customizing some interior parts is required for rear motor installation. Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Spec: Mount F/R: Reinforced rubber / Stock Rate F/R(kgf/mm): 5.0 / 6.0 Free length F/R: 220 / 175 Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring Height adjustment range F/R: -50 to 0 / -45 to -15 *The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height. Rear damping dial Position & Shape: x Extension dial with the product: x Stabilizer link with the product F/R: x / x BRAIN connection: ○　It may not fit, depends on manufacture year. Please check the chart on BLITZ HP. For CT, ZWA10, 2ZR-FXE engine, MY 01/2011 - Remarks: Removing or customizing some interior parts is required for rear motor installation. Optional parts DSC PLUS GPS sensor kit is listed as 135-055-999 DSC PLUS remote switch is listed as 135-055-998 BLITZ DAMPER ZZ-R SpecDSC PLUS Features: G-sensor and new motor equipped. The full-length adjustable suspension kit, which allows up to 96 levels damping force adjustment to be controlled freely from inside the vehicle. -Equipped with "Full Auto" mode. -Fully automatic control function that stabilizes the posture with appropriate damping force based on the number of passengers and running conditions. -2.5-inch VA liquid crystal display. -Damping force of four wheels can be displayed at any time. -More intuitive operation by adopting a rotary encoder. Increased UP and DOWN button size. -Equipped with G sensor as standard. In the map control mode, fine damping force adjustment is possible from turning G, acceleration / deceleration G, and vehicle speed. -In addition to real-time display of G, peak display is also possible, which is convenient for setting. -A total of 22 modes are prepared. Switchable between simple and easy STANDARD and ADVANCED with complicated and detailed control. -The adoption of a high-performance bipolar (two-phase inversion) control motor achieves a 17% reduction in size compared to the conventional model and a 5% speedup. -Equipped with an ambient light sensor and an auto dimmer function that automatically adjusts the brightness of the liquid crystal according to the surrounding brightness. -With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Note: This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.

Optional part for DAMPER ZZ-R SpecDSC PLUS. With the separately sold GPS sensor kit, it is possible to control the vehicle speed linked more easily. Displays speed, time, latitude, longitude, and sea level above GPS. Previous part number was 15235.

Optional part for DAMPER ZZ-R SpecDSC PLUS.

For stock Toyota exhaust. Material: Titan Tail diameter: φ110-2.5R×2 Choose the type. PN 63188V, for SUPRA RZ, Model: 3BA-DB42, Engine: B58, MY 05/2019 - PN 63189V, for SUPRA SZ-R SZ, Model: 3BA-DB22 3BA-DB82, Engine: B48, MY 05/2019 - Note: For Toyota stock genuine muffler. Need to re-use genuine bands. No NUR-SPEC logo. Features: Just replace the stock tail ends to BLITZ finishers. It is possible to rotate the tail end in the range of 90° (No logo on the tail ends). It possible to choose your favorite slash cut design in the vertical direction or the horizontal direction.

For RX300 Koki (later model), AGL20W AGL25W, 8AR-FTS engine, MY 08/2019 - BLITZ BRAKE HOLD JUMPER Features: - BRAKE HOLD JUMPER that automatically controls the brake hold that keeps the stopping without stepping on the brake. -The brake hold function is a convenient. However, it is turned off every time the engine is started. Installing BLITZ BRAKE HOLD JUMPER makes it possible that the brake hold function is controlled to be turned on in conjunction with the start of the engine or the using the driver´s seat belt. - Designed exclusively for vehicle types. - Includes short parts for wiring connection. - For the time the brake hold function is not required, you can return to normal control with simple operation. NOTE: - Some vehicles turn on / off the brake hold function in conjunction with the removal of the seat belt. Inquire us applicable model. - Please read the instruction manual carefully and understand the operating conditions and precautions for the brake hold function before use. (When the instruction manual is in Japanese, by buyer request, sending a pdf to Japanparts.com, automatic translation will be sent back) - Do not overestimate the brake hold function and be careful to always operate the brake and handle. - Wiring processing is required to connect the seat belt signal line.

Material: SUS304 Tip Material: Titanium color stainless Tip O.D.: φ108OVAL-2.5R Tip Piece: 4 Pipe Size: φ50-φ5x2 Consist of:2 Close Sound Level (OEM/BLITZ): 80dB / 84dB Minimum Road Clearance : 150mm, at front piece pipe Weight (OEM/BLITZ): 11.0kg / 11.7kg Silencer structure: Straight structure For COROLLA TOURING, Model NRE210W , 8NR engine, MY 10/2019 -, For Turbo For COROLLA, Model NRE210 , 8NR engine, MY 10/2019 -, For Turbo Available optional tips: φ108OVAL VSR TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62206 φ108OVAL VS TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62207 BLITZ NUR-SPEC CUSTOM EDITION Features: - All stainless SU304 muffler "NUR-SPEC" which is high quality mirror finish and high durability. - New stractures, tail pipe is separate from muffler. You can select optional 2type colors and volume. - The exhaust efficiency is raised by adopting a silencer with a straight structure, and powerful bass sound.

Material: SUS304 Tip Material: Stainless Tip O.D.: φ108OVAL-2.5R Tip Piece: 4 Pipe Size: φ50-φ5x2 Consist of:2 Close Sound Level (OEM/BLITZ): 80dB / 84dB Minimum Road Clearance : 150mm, at front piece pipe Weight (OEM/BLITZ): 11.0kg / 11.7kg Silencer structure: Straight structure For COROLLA TOURING, Model NRE210W , 8NR engine, MY 10/2019 -, For Turbo For COROLLA, Model NRE210 , 8NR engine, MY 10/2019 -, For Turbo Available optional tips: φ108OVAL VSR TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62206 φ108OVAL VS TAIL for NUR-SPEC CUSTOM EDITION(1pc) 62207 BLITZ NUR-SPEC CUSTOM EDITION Features: - All stainless SU304 muffler "NUR-SPEC" which is high quality mirror finish and high durability. - New stractures, tail pipe is separate from muffler. You can select optional 2type colors and volume. - The exhaust efficiency is raised by adopting a silencer with a straight structure, and powerful bass sound.

Material: SUS304 Tip Material: Titanium color Tip O.D.: φ101.6-2.5R Tip Piece: 2 Pipe Size: φ50x2 Consist of: 1 Close Sound Level (OEM/BLITZ): 76dB / 85dB Minimum Road Clearance : 190mm at flange Weight (OEM/BLITZ): 13.8kg / 6.5kg Silencer structure: Straight structure For MAZDA3 FASTBACK , Model BP8P, S8 engine, MY 05/2019 -, Diesel Available optional tips: φ101.6 CR TIP for NUR-SPEC CUSTOM EDITION(1pc) 62203 φ101.6 VSR TIP for NUR-SPEC CUSTOM EDITION(1pc) 62204 φ101.6 VS TIP for NUR-SPEC CUSTOM EDITION(1pc) 62205 BLITZ NUR-SPEC CUSTOM EDITION Features: - All stainless SU304 muffler "NUR-SPEC" which is high quality mirror finish and high durability. - New strictures, tail pipe is separate from muffler. You can select optional 2type colors and volume. - The exhaust efficiency is raised by adopting a silencer with a straight structure, and powerful bass sound.