Spec:
Mount F/R: Reinforced rubber / Reinforced rubber
Rate F/R(kgf/mm): 4.0 / 4.0
Free length F/R: 220 / 240
Spring F/R: ID62 straight spring / Barrel or Taper type exclusive spring
Height adjustment range F/R: -60 to 0 / -52 to -20
*The range is when adjusting the height on the lower bracket side. *Adjustment range may change due to grade, vehicle weight... etc. *Even within the range, it may interfere with the inner fender and others. Also, please check the minimum ground clearance and set the height.
Rear damping dial Position & Shape: x
Extension dial with the product: x
Stabilizer link with the product F/R: FF / x
BRAIN connection: ○　It may not fit, depends on manufacture year. Please check the chart on BLITZ HP.
The data is for ZVW50 2ZR-FXE engine

For PRIUS, ZVW50 ZVW51, 2ZR-FXE engine, MY 12/2015 -
Remarks: 2WD

Optional parts
DSC PLUS GPS sensor kit is listed as 135-055-999
DSC PLUS remote switch is listed as 135-055-998

BLITZ DAMPER ZZ-R SpecDSC PLUS Features:
- Full length adjustable, single cylinder type, up to 96 levels damping force adjusting by the electronic control. Reasonable price, but a number of aluminum parts achieve both high strength and light weight.
- You can freely change the damping force from car controller (96/64/32 levels selectable). Use the stepping motor, achieve a comfortable ride and a finer set-up of up to 96 levels.
- Two control method are available. Control right and left simultaneously and Four-wheel independent control. In addition, it can remember five modes setting.
- Compact and a stylish controller.
- ″Highway mode″ to switch the damping force by inputting the vehicle speed signal. In accordance with the high-speed driving, the damping force mode is switched. Touch-BRAIN (option: code No.15158) in cooperation with, the signal at the input is also easily possible.

For more info, Click here　to check BLITZ HP

Note:
- It is possible malfunctions some devises with radar, camera, sensor etc. by installing DAMPER ZZ - R series. It is also possible that malfunctions such as safety equipment, collision avoidance support equipment, driving assistance equipment of each car manufacturer may occur.
- When installing the DAMPER ZZ-R series, especially in the case of the strut type suspension, the shock absorber may interfere with even genuine wheels and tires.
- When installing DAMPER ZZ - R SpecDSC PLUS, there is a possibility that the motor can not be installed depending on the shape of the strut tower bar. (genuine optional item, aftermarket item).

Note:
This item may require an extra shipping charge depending on the destination country. If it does, we will contact you by email within 3 business days after the order is placed and tell you how much extra it costs for shipping. You can ask us to cancel the order if you would not like to pay the difference. We will proceed with the order once we receive the extra payment from you.